How to Replace the Subaru Legacy Air Filter
The air filter is a key component in your Legacy's motor function. Replacing the air filter on your Subaru is an easy process. It does not require any tools. You can purchase a new air filter at any auto parts retailer and perform this basic maintenance at home.
Things You Will Need:
- Replacement air filter
- Purchase the appropriate replacement air filter. In most cases, you can find the right air filter at any major auto parts retailer. You might also consider contacting your Subaru dealer and purchasing a replacement air filter from them.
- Open the hood of your Subaru. Locate the hood prop, which will be found laying across the front of the car. Use the hood prop to secure the hood in place and gain access to the engine.
- Locate the air box on the engine. It can be found on the passenger side of the vehicle, in the front of the engine compartment. The filter is contained in a square plastic box. The lid is held on by two plastic clips.
- Using firm but gentle pressure, pull up on the two clips that secure the lid on the air filter housing. Remove the lid and set it aside so that it is out of the way of the engine.
- Locate the air filter. Grip it firmly and pull up to remove it from the air box.
- Insert the new air filter. Simply position it in the same way as the old filter and slide it into the open slot on the air box. It will snap into place.
- Replace the lid on the air box by placing it on top of the box and pushing down to secure the clips. When you are finished, close the hood of your Legacy.