How to Roof a Doghouse
Roofing a doghouse is from a very simple to a very complicated project. If you want it to look like your house, it will take a lot of work. If you just want to keep the dog dry and out of the elements, it will be much simpler. It is up to you and what you want for your dog. Let us start simply first.
Items you will require:
- Hammer
- Staple gun
- 15 lb roofing felt
- Short roofing nails
- Shingles
- Measure the roof to know how many shingles you will require to cover the roof. In most cases, one bundle of shingles will suffice. However, it never hurts to make certain prior to going to get them. (The square footage from your measurements above divide by 100 tells you exactly how many bundles you need.)
- Use your measurements to know how much roofing felt to use as well. It is to keep the moisture out and the shingles dry. The 15 lb felt is most commonly used in roofing.
- Install the felt first; it will be underneath the shingles. Run the paper from the bottom of one side over the top and down the other side. Use only enough staples to hold it down until you get the shingles on.
- Place the first row of shingles upside down at the bottom edge of the roof using the short shingle nails hold it in place. Place the next row (right side up this time) right on top of the ones you just put on nailing them into place. Continue until this side of the roof is covered. Repeat this process on the other side of the roof until the roof is covered.
- Cut the tabs off the shingle (the piece that resembles a flap) and nail them over the top of the roof to prevent leaking.