How to Seal Travertine Tile
Travertine tile is not only a great stone to use on the inside of your home, but it also can be used on the outside of the home. The secret to extending the life of the tile is to properly seal it.
Travertine tile should be properly sealed to extend the life of the tile and to keep it looking good. It is a porous tile and it can be damaged by the absorption of too much water. Sealing the tile is something you can do yourself in a matter of minutes.
- Purchase a sealant that is made to use on stone tile. This can be purchased at most home improvement stores. If you are unfamiliar with the type of sealant to use ask your salesman to recommend a product.
- Clean the tile thoroughly before applying the sealant. It is recommended that you use the type of cleanser suggested by the manufacturer of the sealant you are using to avoid the clashing of chemicals in the products, which could ruin your tiles.
- Fill a spray bottle with water and wet the surface of the tiles.
- Allow the water to set on the tiles for a couple of minutes.
- Use a paintbrush to apply the sealer to the tiles.
- Allow the sealer to set for approximately 30 to 45 minutes.
- Use a towel to remove any excess sealer.
- Apply another coat of sealer on the tiles.
- Use the clean cloth to remove any excess cleaner.
- Allow the sealed tile to cure for approximately 48 hours.