How to Service an Automobile Engine
Your automobile engine will need service on a regular basis to maintain moving parts and replace any worn or broken parts. In addition, you will need your hoses, lines and filters replaced on a revolving schedule to keep your engine as healthy as possible.
Supplies
- Needle nose pliers
- Phillips screwdriver
- Soldering iron
- Oil filter
- Oil (4-5 quarts)
- Catch tray
- Inspect your engine bay for any hoses that look worn, flex unnaturally or feel soft to the touch. Do not be afraid to firmly squeeze your hoses as you check their remaining lifespan. Replaceany worn hoses you find with new hoses from the auto parts store by using a Phillips screwdriver to remove the hose clamps and the needle nose pliers to disconnect the hose. You must replace the worn hose with the correct hose to ensure the bends are in the right places.
- Follow the wiring harness from the ECU located under the rain cover in your engine bay. Check these wires for any frayed or exposed wire. Replace the worn wires with a new piece of wire using your soldering gun to connect the ends.
- With the catch tray under the oil pan, use the ratchet and socket set to unscrew the oil drain plug. Let all the oil drain into the tray. Unscrew the oil filter and place into the tray. Inspect the old oil and filter for any metal particles that may indicate a problem with your engine. Replace your filter with a new oil filter and torque down your oil drain plug. Refill your engine with four to five quarts of oil through the top of the engine, usually on the valve cover.