Previous Article

How to Sharpen Barber Clippers

Next Article

How to Sharpen Drawing Skills

How to Sharpen Dental Instruments

Sharpening and maintaining dental instruments is a crucial part of dentistry. When dental instruments become dull, they are unable to work properly and can cause injury to the dentist or patient. Properly sharpened instruments make cleaner cuts and make the dental surgery must faster and easier.

Items needed:



  • Sharpening stone

  • Safety goggles

  • Lubrication

  • Clean cloth


 
Step 1:
Be sure to wear safety goggles while sharpening dental instruments. Metal shavings could fly into the air as the instruments are being sharpened. Safety goggles help protect your eyes from the metal shavings.


Step 2: Apply lubrication to the sharpening stone. Squirt the lubrication on your hands and then rub your hands over the stone to cover it. Lubrication helps prevent metal shavings from sticking to the stone and instruments and allows them to be sharpened quickly.


Step 3: Hold an instrument in your hand horizontally. Hold the sharpening stone with your other hand. Scrape the dull part of the instrument lightly across the sharpening stone. Be careful not to scrape the instrument across the stone too fast or with too much pressure as this could cause the instrument to become hot.


Step 4: Turn the instrument over and scrape the other side against the sharpening stone. Again, do not use to much speed or pressure. If you notice the edge of the instrument begins to look rough looking, run the edge across the stone with small even strokes until it become smooth and sharp.


Step 5: Wipe the instrument with a clean cloth to remove any metal shavings or pieces of the sharpening stone. Place the instrument and storage and choose another instrument to sharpen. Repeat these steps until all of the instruments have been sharpened.