How to Shift a 1998 Chevrolet Camaro
Manual transmissions require the driver to shift the vehicle in different gears. A lot of people don't know how to properly shift a vehicle without causing damage to the motor, transmission or clutch. Practice shifting your Chevrolet Camaro in an open parking lot so you don't risk injuring yourself or other people.
- Sit in the Camaro and look at the pedals on the floor. You'll notice there is an extra pedal other than the gas and brake pedal. This pedal engages the clutch, allowing you to shift the gears.
- Push the clutch pedal down with your left foot and turn the vehicle on. Make sure the transmission is in neutral by moving the shifter to the center of the shifter console.
- Put your right foot on the brake pedal and release the emergency brake with your left foot. The emergency brake needs to be engaged whenever you shut the camaro off so the car doesn't roll away.
- Engage the clutch with your left foot while your right foot is still on the brake.
- Move the shifter into first gear. This is normally done by moving the shifter up and left.
- Remove your right foot off the brake and slowly let your left foot off the clutch. The Camaro should start to idle forward. Press the gas pedal with your right foot to move the car faster.
- Shift the car into second gear by letting off the gas and engaging the clutch again with your left foot. Move the shifter into second gear and let off the clutch. Repeat this process until you've reached the final gear.