How to Size a Marine Uniform Belt

The belt of a marine uniform needs to be sized carefully, as it is made of webbing and will shrink when it is washed. It is important to properly fit these belts and take proper care of them, or they will not look well with the marine uniform. You can learn how to size a marine uniform belt in a few short steps.

Supplies

• Marine belt


• Washing machine


• Scissors

1. Wash the marine uniform belt in your washing machine. Wash it in warm water using the regular cycle. Wash the belt by itself only. If you wash it with other garments, the colors from those garments may run on your belt. When it is finished washing, do not put it in the dryer.


2. Remove the marine uniform belt from the washing machine and use your hands to stretch it all the way out. Repeat this process at least 5 times.


3. Repeat the washing and stretching process three times so the belt will not shrink again when it is washed.


4. Put the belt in the dryer after the third wash cycle or hang it and let it air dry. Wrap the belt around your waist until you have a snug fit. You do not want the belt to be too tight. Make note of the length of the belt when it fits snugly.


5. Take the belt off and add an extra 2 to 4 inches make room for your Marine uniform pants. Use some scissors to cut the excess belt off. For example, if you have a 34-inch waist, you will need to cut the belt around 36 to 38 inches.