Previous Article

How to Solve Culinary Equations

Next Article

How to Soothe Common Cold Symptoms

How to Solve Water Heater Problems

If you run out of hot water during your shower or bath, it may be due to the hot water heater. Water heaters provide hot water to showers, baths, dishwashers and washing machines. There are basic things that homeowners can do to find the cause of the water heater problem so they can fix it and restore hot water.


  • Make sure the hot water is not turned on anywhere in the home for two hours. This will give the water heater time to regenerate more hot water. The water heater tank could have simply run out of hot water.

  • Inspect the water heater for any leaks or corrosion to the tank. If there is only a small amount of rust, you can sand it away. Larger areas of rust or leaks will require professional repair or replacement of the water heater.

  • Inspect the threaded pipes that go to the heater. Check to see if they are covered with buildups or deposits. The deposits or buildups will affect water pressure and the covers will need to be replaced.

  • The wrong temperature on the water heater thermostat could be causing the problem. Adjust the thermostat to a comfortable setting. The safest temperature for a water heater is 120 degrees Fahrenheit. Anything higher can cause burns. If the water temperature does not change, then the thermostat may need replacing.

  • If the tank is powered by gas, check for gas odors. Gas leaks could prevent the water heater from working and it is also dangerous. If a gas leak is detected, turn off the gas valve and call a professional to help with the gas leak.

  • Check to see if the pilot light is still burning. An unlit pilot light will prevent the water heater from heating the water. Light the pilot light according to the heater's manufacturer.