How to Sound Insulate Interior Doors
Taking the time and effort to insulate interior doors is not as hard as you may think. In fact, thanks to the use of spray insulation products, just about anyone can take a hollow interior door and sound insulate it in very little time. An ideal weekend project, homeowners can use this method to increase the peace and quiet on the home front without incurring a lot of cost.
One of the best ways to keep the home peaceful and harmonious is to sound insulate interior doors throughout the space. While many people think to insulate walls to help muffle sounds, not everyone does the same with doors. There is in fact a simple way to go about this process, providing even more peace and quiet wherever you desire.
Things You Need:
- Screwdriver
- Drop Cloths
- Sawhorses
- Power Drill with ½ or 3/8 inch drill bit
- Spray Insulating Foam
- Wood putty
- Set up your work area. Spread drop cloths over a flat surface, such as a porch, work room or the back yard. Position the saw horses to support the door and allow room to walk all the way around the door while it is mounted horizontally on the horses.
- Remove the interior door from the door frame. Accomplish this by using the screwdriver to remove the screws holding the door to the frame. Start with the bottom hinges and work your way up in order to manage the task with a minimum of difficulty. Once the door is free of the frame, place it face up on the saw horses.
- Drill holes along the edges of the door. The idea is to pierce the outer layer of the door to the hollow interior. Two holes along the top and bottom and three holes spaced evenly along each side should be sufficient for the task.
- Prepare a can of spray foam insulation for injection into the hollow door. Most products of this type will come with a straw that attaches to the nozzle of the can with ease. Shake the can first to make sure the chemicals in the insulation are mixed evenly in the can. Attach the straw to the nozzle and insert the open end of the straw into one of the drilled holes along the top of the door.
- Depress the nozzle and release the spray foam insulation into the door. When the product begins to bubble up in the hole, stop and move on to the next hole until the foam once again bubbles out. Repeat the process until you’ve made a complete circuit around the door, injecting the product into each of the drilled holes. Keep in mind that depending on the size of the door, it may take two to three cans before the door is adequately filled.
- Fill the holes with wood putty. Apply just enough to fill each of the holes. Use a trowel to smooth the area around the hole and allow the putty to dry completely. From there, you can use a staining pen or paint over the plugged holes in order to match the color of the door. Once the project is complete, use the screwdriver to reattach the door and hinges to the door frame.