How to Spray Paint Car Parts

Spray painting car parts is not as difficult as it might look. This is a great way to save money and update the look of your car. When done carefully, an old car can improve greatly, as all of the scratches and rust are removed. Spray painting should always be completed in a well-ventilated area.

Materials:

• Spray paint in chosen color


• Primer


• Paint cloth or newspaper


• Sandpaper or sanding machine

1. Obtain the part you intend to spray. If the car part to be sprayed is still attached, it will need to be removed from the automobile. If it cannot be removed, then the surrounding components should be covered to protect them from being splattered with paint. The part to be sprayed should be placed on newspaper or a paint cloth.

 2. Remove the old paint. You will next need to remove the old paint and primer from the surface of the car part. This can require manually using sandpaper to remove it or using a sanding machine. If this is your first time using a machine, test it to see if it causes damage before using it over the whole car.

3. Use a clean cloth to remove dust and old paint chips. Using a dry cloth, gently rub the surface of the part to remove any residue. Look for dust and paint chips that were left from sanding. Use a clean cloth to prevent any dirt from getting onto the car part.

4. Add primer to the car part. After the surface of the car part is completely clean, it is a good idea to apply a layer of primer to it. This should be done in a slow manner while using a paintbrush. For some car parts, the one layer of primer might not be enough and a second coat of primer can be added.

5. Spray the part. After the primer has had a chance to dry, shake the paint can and start to add the spray paint. Ensure your hand is held a certain distance away from the part as per the instructions on the can. Depending on the size of the car part, you might need at least two to three coats of spray paint.