Previous Article

How To Strip Hair Dye With Household Products

Next Article

How to Study Accounting

How to Strip Hardwood Floors

In order to resurface a hardwood floor, first it must be stripped of the old finish. Although stripping the floor will take a lot of time and patience, it does not require the services of a professional. It is something that you can easily do yourself.

How to Strip Hardwood Floors




  1. Remove all the furnishings from the room.


  2. Remove any carpet tacks or staples that may be in the floor.


  3. Use a broom to thoroughly sweep the floor.


  4. Use 36-grit sandpaper on a drum sander and slowly push or pull the drum over the floor in the direction of the wood grain. Continue to do the entire surface of the floor.


  5. Use an edge sander with course sandpaper to sand along the walls and corners moving it left to right in a semi-circular motion.


  6. Replace the sandpaper in the drum sander with 60-grit sandpaper run it over the floor.


  7. Replace the sandpaper in the drum sander with an 80-grit and run it over the floor.


  8. Use a vacuum to remove the dust and the floor is now ready to be refinished.