How to Tie Camping Knots
There are a few basic types of knots that you will want to know how to tie before you head out on your camping trip. Knowing how to tie these knots will make your tent more secure. Fortunately, it is quite easy to learn how to tie these various knots and in no time at all you will be looking like a pro whenever you need to use them.
Two Half-Hitches Knot
- Run the end of your rope around the item that you want to secure.
- Loop the end of your rope around and through the loop that you have created.
- Pull your rope to create enough slack for your next hitch. This will complete the first half hitch.
- Move the working end of your know over the standing line and pull it down through the loop that you have just created.
Bowline Knot
- Run the end of your rope around the item that you want to secure.
- Create a loose half hitch around the main part of your rope as if you were tying a two half-hitches knot.
- Put your thumb under the rope and your fingers on top of it.
- Grab the rope where it passes across itself.
- Turn your hand over.
- Put your fingers and the en of your rope through the middle of the loop.
Taut Line Knot
- Use a taut line knot to form an adjustable loop.
- Run the end of your rope around the item that you want to anchor.
- Bring the rope back up along the standing part of your rope.
- Create a half hitch as if you were tying a two half-hitches knot.
- Create another wrap on the inside of your loop. This will form a round turn around the standing part.
- Complete this knot with another half hitch on the outside of the loop. It should go in the opposite direction of the first two wraps.
- Pull the hitch snug around the standing part.
Sheet Bend Knot
- Form a “U” out of one end of your rope.
- Put the opposite end of your rope through the center of the “U” and then wrap it around the “U.”
- Put the loose end of the rope underneath the rope where it went up through your “U.”
- Tighten the rope up until you have a snug knot.