How to Tighten a Wire Fence
Tightening a wire fence is a task that may property owners face from time time to time. The good news is that the process used to tighten the fence is very simple, although it can be somewhat time consuming. With a little effort and a few basic tools, the job can be managed with relative ease.
Things You Need:
- Claw foot Hammer
- Protective Gloves
- Fence Pliers
- Fence Staples
- Fence Stretcher
- Don the protective gloves. The process used to tighten a wire fence will mean coming in contact with the wire. Wearing the gloves will help minimize the chances of sustaining scratches or abrasions to the hands.
- Begin at one end of the fence, at the next to last post. This will position you to tighten the fence between the first and second posts, and then move on to repeat the process with subsequent sections until the job is complete.
- Detach the wire from the post. Use the pliers to remove the staples holding the wire in position. This will make it easier to stretch the wire until it is taut.
- Position the fence stretcher on the opposite end of the second post. Thread the loosened wire through the stretcher and shut the mechanism that holds the wire in place. Using the body of the post as leverage, begin to ratchet the wire toward you. This will pull the wire until it is tight once more.
- Secure the wire. Once the wire section is taut once more, quickly secure it into position on the post with a new fence staple. Place a staple over the wire against the post, and then pound it in with the hammer. Release the wire from the stretcher after the staple has secured the wire into position. Move on to other wires running between the two posts.
- Continue the process until the job is done. Focus on the wires between two posts at a time, gradually working your way to the far end of the fence. Once you have made a complete circuit, your fence will be strong and tight again.