How to Tile a Bathroom Vanity Top

Homeowners looking for affordable ways to update the look of their bathrooms will find tile a great option. This is an easy project you can do yourself and add value to your bathroom instantly. Make your tile stand out by updating your paint as well.

Supplies

• Sander


• Sandpaper


• Scraper


• Tiles


• Tile spacers


• Tile saw (if you’re cutting large pieces)


• Grout


• Grout tool


• Caulk


• Trowel


• Mortar


• Measuring tape


• Rag/sponge

Directions

1. Measure vanity area, then add additional incase of breakage. Remember to measure the sides and front of the vanity countertop.


2. Pick out your tiles; choose tiles that fit within your smallest measurements to reduce time spent cutting pieces to fit.


3. Remove sink and scrape away any remaining caulk.


4. Sand the vanity to remove the previous finish. Remove all debris a cloth lightly damp works well for this.


5. Lay out several rows of tile to be sure of your placement. Make any adjustments now before applying mortar.


6. Mix mortar and begin applying to the vanity. The trowel works best for spreading an even layer of mortar.


7. Set tiles in place working front to back. Go slowly for the first few rows so that you may make adjustments. Place spacers as you lay each tile to keep the tiles straight. Work on the sides of the vanity last. The mortar will need to dry for about 12 hours.


8. Remove spacers. Mix grout if not premixed. Spread grout over tiles with grout tool. Remove extra grout with a damp sponge or rag; just wipe the surface to remove. Allow to dry 12-18 hours.


9. Replace sink and fixtures. Use caulk to secure in place.