Previous Article

How to Start a Small Photo Printing Business on the Side

Next Article

About Silk Printing

How to Transfer Color Print Images Onto Sheet Metal

Make a lovely handmade gift for yourself or a loved one by transferring a color print image onto a piece of sheet metal. This can be scrap metal for a mixed media art project or a piece of metal already cut, such as a heart-shaped pendant for a handmade necklace. The process is simple to do with the right materials.


 

Items Needed:



  • Water transfer paper

  • Ink jet printer

  • Scissors

  • Shallow bowl

  • Paper towel

  • Acrylic clear coat spray



  1. Select the image you would like to use, and print it onto water transfer paper with an ink jet printer. If the image is not on your computer, you will need to scan the image to load it on the computer, and then print it onto the transfer paper. Trim the edges of the image until you are satisfied with the size.

  2. Pour water into a bowl that is wide enough to fit the entire image without bending it; a shallow bowl works best. You can also use a baking pan if you cannot find a bowl the right size. Place the image facedown into the water for two minutes, and check the corner to make sure the backing is beginning to separate. If it is, go ahead and remove the backing paper from the image. If not, leave it in for another minute.

  3. Place the image on the piece of sheet metal with the image facing up, sliding it around until you are satisfied with the placement. Remove any folds or wrinkles in the paper using a wet paper towel. Let it dry for at least 24 hours, then spray two or three coats of clear acrylic spray paint. It may take between two and four hours to dry completely, depending on the type of acrylic spray you chose.