Previous Article

How to Treat Basement Mold After Water Intrusion

Next Article

How to Treat Homes With Basement Mold

How to Treat Carpet Water Damage

Water damage to a carpet can lead to further problems, such as mold, if the water is not removed in a timely manner. If you have water-damaged carpets, how well they can be treated will depend on the amount of damage. Some carpets damaged by water cannot be saved. Here's how to treat water-damaged carpets that can be repaired.


  1. Knowing the source of the water
    damage will help you to assess the area and treat it more
    effectively. If the water damage was caused by clean water, you
    should be able to treat the carpet. On the other hand, if the carpet
    was damaged due to something that was unsanitary, you will want to
    replace it rather than try to treat it for your own safety.

  2. Remove the furniture around the
    water damaged carpet. Use tape or something that you can easily see
    to mark the edges all around the damaged area. Make sure that the
    source of the water on the carpet has been found. For instance, if
    you have a pipe that is leaking on to the carpet, this must be fixed
    before treating the carpet, otherwise your efforts will be in vain.

  3. Rent a shop vacuum that can
    extract water or a water pump machine to extract the water from the
    carpet. In order to save the carpet, you should have it dried no
    more than 12 hours after the accident occurred. Therefore, continue
    going over the carpet until no more water is sucked out.

  4. Turn on fans in the room to allow
    it to dry faster. If you have ceiling fans in the room, turn it on
    full speed overnight.