Previous Article

How to Repair Loose Roof Shingles

Next Article

How to Wash Roof Shingles

How to Trim Roof Shingles

Trimming your roof's shingles on your own can save you money. Instead of hiring someone else to do it for you and hurting your wallet, you can follow some simple steps to have your roof looking neat and trim in no time!

You will need the following:



  • A utility knife with a hooked blade 

  • Your steady hands

  • A piece of chalk

  • A flat piece of wood (optional)


1. Draw a straight line with your chalk on the first shingle to use as a guide.


2.  Place the knife upon the shingle and the mark you made and make a clean cut, pulling the knife towards you using the hooked portion of the blade.


3. Use a piece of wood (about 1 inch by four inches) to guide you if you are experiencing difficulty cutting in a straight line.


4. Use your knife to continue trimming each shingle, lifting one layer at a time to prevent the knife from getting stuck. Cut one shingle at a time because that is the fastest most efficient way to trim them.


5. Allow about a half-inch to hang over the edge of the roof as you trim the shingles for a clean look.


You need to be careful not to cut your fingers or hands. Take extra caution as you are holding the knife to cut the shingles. Following these simple steps will ensure you can satisfactorily trim your roof's shingles on your own and save you money.