How to Troubleshoot Small Appliances
If you are handy with a few tools it may be worth your while to learn how to troubleshoot small appliances. Most appliances are easily repaired with common household tools such as pliers and screwdrivers, so there is no big investment needed. Keep these tips in mind to make troubleshooting and repairing small appliances easier and save a repair charge.
Required Items
- Continuity tester
- Pliers
- Screwdrivers
- Flashlight
Collect a couple of tools and supplies that you will need for testing and opening components. One or two small sized screwdrivers should suffice, standard and needle nose pliers and a flashlight.
Remove parts and place them on a table or counter. Keep them lined up in the same order in which they were removed to help you remember how to reassemble the parts. Some appliances have very tiny screws and assorted parts. Use a small piece of masking tape and tape them to the counter so they will not get lost.
Refer to the instruction manual that came with the appliance for tips on troubleshooting. Many of today's manuals provide information about resetting appliances and troubleshooting. Be exceptionally careful when working with tools on equipment you are not familiar with.
Check for power problems before you begin taking any appliance apart. Apply your continuity tester to the electrical cord to check for cord failure. Test the electrical outlet with another light or appliance to see if they work. Reset the breaker if necessary.
Open the appliance if you have not resolved the problem. Unplug the appliance from the outlet. Refer to diagrams that may be in the users manual for additional help. Use your flashlight to locate tiny screws, screws that are hidden with rubber or felt covers or under labels.
Check switch components first, which are usually the problem. Use the flashlight to see any loose wires, dirty contacts and worn parts. You may have to replace burnt wiring or clean parts using an electrical contact cleaner.
- Look for signs of a faulty motor or one that needs lubricating. A burnt smell is usually a sign of a motor problem. Grinding noises could indicate burned-out bearings.