Previous Article

How to Fix an Ignition Problem on a Bryant Furnace

Next Article

How to Remove the Igniter in Payne and Bryant Furnaces

How to Troubleshoot a Bryant Furnace System

Bryant Furnace Systems is one of the leading furnace systems suppliers. There are different models that are either powered by oil or gas. For the systems to last long and perform at optimal levels, it is necessary to provide regular maintenance. Trouble shooting the system can be done by the homeowner.


  • Turn on the furnace at the thermostat.  Adjust the temperature settings to make sure the temperature changes according to the settings on the thermostat.

  • Turn the thermostat to the ‘cool’ position and check to see if it responds accordingly. Make sure you set the temperature within reasonable parameters depending on the temperature outside.

  • Check the display on the thermostat and if the battery warning indicates the batteries are low, replace them.

  • Inspect the fan switch if you notice the temperature is not changing. Make sure the switch is still on. If it is, check the circuit breakers and then the SSU switch. Make sure everything is on. Change any fuses that may be causing the problem.

  • Remove the back cover of the heat pump to reach the filters. Remove the filters and brush off any dust or debris that may be adhering to them, then reinsert them. The location of the filter will depend on the model of the furnace.

  • Replace the furnace filter regularly, the thin ones every two months and the thicker ones every four months.

  • Slide in the new filter where you took out the old one and ensure the airflow arrow is pointing in the right direction. Consult the manual is you are not sure.