Previous Article

How to Unclog a Sink

Next Article

How to Unclog a Slow Drain Pipe

How to Unclog a Sink Using a Drain Snake

There are few things more annoying than to discover you are on the receiving end of a chronically clogged drain. Hair, oil, food and debris can all play a part in disrupting the overall drainage capacity of your sink. Fortunately a drain snake is both easy to acquire and simple to use.


  1. Go to your local hardware store. This will be your first stop on the road to a clean drain. Flag down a sale associate and have them lead you to their plumbing supplies and from there, to the drain snakes. Feel free to ask them questions about the possibility or renting a snake out for the afternoon if you are reluctant to purchase one outright.

  2. Make room. Clear out any dishware of glasses that might be cluttering up your sink area. You want to have plenty of room in which to work and do not need to be preoccupied with the potential for breaking your dishes.

  3. Start bailing. One of the primary signs that a drain has become clogged is the amount of standing water one observes within the sink itself. This water should be removed as well as you are able in order to ensure visibility and to prevent the possibility of draining complications. The use of a common plunger may assist in getting some of the water to drain away as well, but expect it to take a little time and be patient.

  4. Dig a little. Put on your favorite pair of dish washing gloves and reach carefully down into the drain to see what, if anything you are able to dislodge with your fingers. Any conveniently reachable masses of hair or debris should be removed prior to snaking your drain.

  5. Insert the curving end of the drain snake directly into your sink drain and slowly begin turning the rotating crank handle in a constant clockwise motion. This releases the snake into the drain itself and allows it to continue to be played out via the crank right up until it encounters the mass currently blocking your pipes.

  6. Continue turning the crank and playing out the length of the snake until you encounter resistance. This is your clog. In order to get it to move you need to keep cranking so that the snake can either push the clog free, or push itself through the clog a bit at a time, slowly cleaning the pipe of debris.

  7. Back up. Once you have encountered your clog with the snake, turn the crank in a counter clockwise motion to bring the head of the drain snake back a bit, then firmly resume cranking in a clockwise motion. Backing up and then re-cranking can be an effective method of getting rid of really stubborn clogs. You may also want to give the drain snake a bit of a ‘spin’ around the pipe, just to make sure you’ve cleared things out to your satisfaction.

  8. Run water. This is the moment of truth. Turn on the hot water and let it run for a moment or so, then shut it off. If you find that the water is not draining away at a proper rate of speed, you may want to repeat the snaking process a time or two until it decides to play nicely and work as it should. If you are certain that the pipes are clear, and then allow hot water to run through for several minutes to ensure that all potential residues is flushed completely from your pipes.