Previous Article

How to Get Natural Anesthetics From Plants

Next Article

Risks of Anesthetics to the Fetus

How to Use Anesthetics

Anesthetics are substances that decrease or eliminate sensation.  They range from local anesthetics used to numb small areas for simple procedures to general anesthetics used to induce unconsciousness for major procedures.  The use of anesthetics requires training and observance of proper procedures and safety protocols.  These drugs should only be used by licensed professionals in appropriate medical settings.

Local Anesthetics



  1. Apply or inject the medication to the area you need to numb for the procedure.  Make sure to follow all label directions for the medication.

  2. Wait the amount of time indicated by the label. 

  3. Test the area by putting pressure or lightly pinching the skin to ensure that the patient does not feel sensation.

  4. Perform the procedure.

  5. Monitor the patient to make sure sensation returns within the expected time frame.  Times will vary depending on the drugs used and routes of administration.


General Anesthetics



  1. Perform a preoperative physical exam, blood work and any other diagnostic tests as indicated by the patient's age, health and the procedure to be performed.

  2. Formulate an anesthesia plan based on test results, facilities and the needs of the surgical procedure.

  3. Check to make sure you have the appropriate drugs, monitoring equipment and anesthesia supplies.  Make sure everything is in working order and set up properly.

  4. Provide pre medication drugs if necessary. 

  5. Place an IV catheter if the patient does not currently have one.  Venous access is necessary for delivering drugs efficiently during general anesthesia.

  6. Start IV fluids as indicated by the anesthesia plan.

  7. Place monitoring equipment.  You will need to monitor heart rate, pulse, oxygen delivery, temperature, blood pressure, anesthetic depth and other signs as indicated by the needs of the patient and the procedure.

  8. Induce anesthesia by giving an injection of intravenous drugs as indicated by the anesthesia plan.  Depending on the drugs you choose and the patient's status, the patient should be unconscious within 10-20 seconds.

  9. Check anesthetic depth and vital status with your monitoring equipment.

  10. Place an endotracheal tube to secure the patient's airway.  This will allow you to ventilate the patient and deliver oxygen and anesthetic gas.  It will also protect the airway.  This is necessary because many general anesthetics suppress breathing, swallowing and gagging.

  11. Check the placement of the tube, and begin providing oxygen.  If necessary, begin mechanical ventilation.

  12. Start the anesthetic gas that you will use to maintain unconsciousness throughout the procedure.

  13. Monitor the patient altering gas and oxygen flows as necessary to maintain a surgical plane of anesthesia. 

  14. Provide drugs, heat, fluids and other treatments as needed to maintain the patient's vital signs and appropriate anesthetic depth.

  15. Monitor the patient as he or she wakes up from anesthesia and returns to consciousness.