How to Use Drain Rods
Drain Rods are very effective tools in the art of clearing sewers and drains. They are made of a solid material, polypropylene, that is flexible as well as stiff and can be safely fed down a drain to remove any blockage. Once in the drain, you can do the act of rodding to break-up the clog and clear the drain.
- Purchase a set of drain rods. They will be long poles that come in sets of four or more. Their average cost is $7-$22. You'll find them at most hardware stores.
- Screw together the drain rods. Estimate how long you will need the drain rod to be and then screw together until you reach a reasonable length for the job. You should be able to reach the drains blockage and still have drain rods to hold onto.
- Attach the double worn screw to the drain rods. It typically attaches by screwing onto the end of the rod. This attachment will break up the drain's clog once in the drain.
- Feed the drain rods into the drain. Carefully put the drain rod into the drain and feed it down until it hits the blockage. You may need to wiggle the rod to get it to slide down the drain easier.
- Move the drain rods back and forth or up and down. This is a motion called "rodding" and it will loosen the blockage. Make sure you do it gently so the motion does not damage or break the rods in the drain. Also, turn the rods clockwise while working the clog in order to keep them rods from becoming unattached. It is difficult to retrieve a drain rod from a drain once it is unattached.
- Pull the drain rods out of the drain. If the drain is clear of blockage you can skip to step 12. If the blockage is still in place fully or partially, follow steps 7-12.
- Unscrew the double worn screw off the drain rods. Set aside.
- Screw the rubber plunger attachment onto the drain rods. Typically it attaches by screwing the rubber plunger onto the end of the rod. This attachment creates a suction to release the clog.
- Feed the drain rods down the drain until it hits the blockage or what is left of it.
- Move the drain rods around to plunge out the clog. You may need to plunge for awhile before the clog is removed. You should feel the blockage clearing out. If it does not clear out by now, return to step 3 and repeat the process until the drain is cleared. Once cleared, move on to step 11.
- Remove the drain rods from the drain.
- Unscrew the drain rods from one another to store when you are finished removing the blockage.