How to Use Foggers for Mold Treatment
Mold reproduces when airborne mold spores are released in the air. To get rid of mold growth you must kill the spores and therefore stop the reproduction. Mold problems can be resolved by using a do-it-yourself fogging machine. It is an electric device that sprays oil or water based chemicals onto the contaminated area. Fogging allows you to reach crawl spaces, attics and large areas quickly and effectively.
What You Need:
- A fogger machine - you can purchase or rent one at the local hardware store
- Mold-fighting solution
- Protective wear such as a respirator, gloves, goggles and coveralls
What To Do:
- Fix any leak or humidity problems that may have cause the mold.
- Expose the moldy surfaces so that the fog can land on and coat them. You may need to remove wallpaper, lift the carpet or remove tiles.
- Dry the area completely (for example with fans).
- Close windows and doors.
- Mix the mold-fighting solution according to instructions.
- Twist the power head on the fogger machine to detach the tank and pour in the
solution. - Run the fogger machine by switching the handle (according to its instructions).
- Adjust the output size.
- If you are using multiple fogger machines: Place each machine inside a 15-foot by 15-foot area. If you are using one fogger machine: Move the machine to a 15 feet by 15 feet area until the treatment is over.
- Do not over-apply the solution on surfaces. Run-off or pool formations are signs of
over-application. - If you must enter the space while the machine is running, wear the protective wear.
- Once finished, wipe off excess solution on all flat surfaces with a clean cloth.
- Open windows and doors.
- Allow the product to dry and properly ventilate the entire area before re-entering the space.