Previous Article

How to Reduce Diesel Engine Noise

Next Article

Engine Building Specifications

How to Use Fuel Oil in a Diesel Engine Motor

Diesel engines are considered the most versatile engine types available. They have the ability to burn several different fuels such as used French fry oil and even baby oil. The federal government has strict regulations in place concerning the use of unapproved fuel in diesels and uses a red-dye system to monitor fuel not approved for road use.

What You'll Need:



  • Clear vinyl hose

  • Fuel sample containers

  • Safety glasses



  1. Pour some of the fuel into a smaller fuel sample container and watch. If the fuel is in a larger tank be sure to insert a clear vinyl hose into the container. Plug the end of the hose using your finger and remove the hose. This step will allow you to remove a hose full of fuel for a sample. Insert the hose end into a smaller fuel sample container and remove your finger.

  2. Pour a small amount of the fuel in a paint strainer to ensure that it is clean. You'll also need to remember that fuel oil that is intended to be used within a diesel engine for road use should contain additives that will prevent the diesel fuel from gelling up in cold climates. Any cold climate can turn untreated fuel into a thick substance that can't properly flow through the fuel filter.

  3. Look at the fuel and inspect it for any red dye. If the fuel does contain red-dye don't use it for any vehicle that you intend to use on the road. Doing so is a direct violation of federal law and comes with a hefty fine.