How to Use a Power Washer
A power washer is a motorized sprayer used to clean dirt or debris from surfaces of buildings, road surfaces or vehicles. Water is shot out of the nozzle of the washer at a powerful rate of speed. The equipment can be very dangerous if not operated properly, so it is highly recommended that precautionary measure be taken when using the washer.
How to Use a Power Washer
- Read the manufacturer's instructions before attempting to operate the washer.
- Select the appropriate nozzle for the job you are doing. The nozzle attaches to the end of the pressure washer wand, which is connected by a hose to the washer pump and motor. The nozzle is what determines the pressure of the water. The smallest angle will be the most powerful. Some models will have a special nozzle that will allow you to add detergents or degreasers. Refer to your owner's manual on how to insert the detergent into your washer.
- Put on gloves and protective eyewear before you begin the job.
- Check to ensure that all connections are tight because the nozzle could come off and cause damage to property when the power is turned on.
- Stand 3 to 4 feet away from the surface to be cleaned and slowly press the trigger to the power washer. Stop after a couple of minutes to see if it is clean. If not, stand closer to the surface to be cleaned.
- Continue spraying the surface until it is clean.