How to Use a Snake to Clean Clogged Pipes
A plumber's snake--which is commonly referred to as a snake auger--is a plumbing tool that is easy to use and works well at removing the toughest of blockages in your pipes. You can purchase a snake auger from your local hardware or home improvement store fairly inexpensively. This handy tool will fix your plumbing problems in no time.
- Purchase or rent a snake auger from your local hardware or home improvement store.
- Plunge the affected drain to allow the water in your drain or sink to drain down. If you are unable to get the water to go down by using a plunger, you will need to use a cup to remove the water from the area where you are going to be working on your drain.
- Insert the curved end of the snake auger into your drain, and feed through until you have found the source of the blockage. You will no longer be able to feed the pipe through any further once it has reached the source of your blockage.
- Crank the handle on the plumbing snake in a clockwise motion which will cause the curved end of the rod to twist and turn while applying pressure to the source of your blockage.
- Back up the snake auger slightly by turning the crank in a counterclockwise motion once you feel like you have removed the blockage.
- Reinsert the snake auger further into your drain to see if there are any other sources of blockage in your drain. If you find another source of blockage crank the handle again in a clockwise motion to free the remaining blockage.
- Remove the plumbing auger from your drain completely by turning the crank handle in a counterclockwise motion until the end of the auger has been completely removed from the affected drain.
- Turn on the hot water and allow it to run for up to ten minutes to wash out the remaining dirt, food and debris that are in your pipes. You want to be sure that the blockage is freed from your pipes and washed out into your sewage system.