How to Use an Auto Paint Gun
Auto paint guns are better when it comes to applying car paint than using another other type of application methods. They help the paint go on even without large paint runs. If you decide to use a paint gun, you must make sure you use the correct techniques to ensure the paint is applied correctly.
How to Use an Auto Paint Gun
Materials Needed
- Gloves
- Mask
- Protective clothing
- Paint gun
- Paint
- Cardboard
- Wear gloves, a mask and protective clothing when handling the paint gun. The fumes can be strong and the paint will mist in the area.
- Locate the fluid control knob on the paint gun. Unscrew the knob until it cannot unscrew any more.
- Pull on the trigger until it is completely in the open position. Screw the fluid control knob back in. This will help ensure the best paint application.
- Locate the fan control knob on the side of the paint gun. Open this knob until it is in the open position. This will ensure that the right amount of air flows when applying the paint.
- Connect the paint gun to the hose on the compressor. Fill the paint cup on the paint gun paint.
- Test the paint gun on a piece of cardboard. Read the manufacturer’s instructions to set the air pressure. The proper air pressure to paint delivery ratio will ensure that the paint is applied correctly and not in large drops.
- Press the trigger on the paint gun to begin applying the paint. Move the paint gun side to side to apply the paint.