Previous Article

How to Test Hemoglobin

Next Article

How to Calculate INR

How to Use an INR Test Time Monitor at Home

INR or International Normalized Ratio and PT, prothrombin time, are used to monitor the effects of anti-coagulant therapy. INR monitoring is important for patients taking blood thinners like Coumadin to determine the safest dose and prevent complications. Because INR testing devices are more accurate and easier to use, home testing has gained acceptance in the health care industry as it allows more frequent testing and may reduce dosage changes.

Things You'll Need:



  • A PT/INR home test time monitor

  • Testing strips

  • Finger stick lancets

  • Alcohol pads



  1. Power on the INR test time monitor. Allow the monitor to perform any diagnostics and boot up completely.

  2. Place the monitor on a flat surface.

  3. Insert the test strip into the monitor and verify that the monitor recognizes the strip. Most INR home test monitors will display an error message if the test strip is inserted incorrectly or has expired.

  4. Use an alcohol pad to wipe the fingertip that you will use for testing.

  5. Prick the fingertip with a sterile lancet. This takes practice to get used to and your physician should show you the best way to do this. Avoid using the same finger for multiple tests in a row.

  6. Massage or squeeze the finger to express an appropriate sized drop of blood and apply this to the test strip on the spot indicated. The monitor will display a confirmation that it is testing the sample.

  7. Apply a bandage to the fingertip if bleeding has not stopped.

    When the test is complete, the monitor will display the PT/INR time test results. Follow any instructions from your doctor regarding the necessary steps based on your INR test results.