Previous Article

How to Use British Telecom Phone Services

Next Article

Global Telecommunications Solutions

How to Wire a British Telecom Telephone


The British Telecom telephone socket used in the United Kingdom physically resembles the telephone sockets in the United States, although they are not compatible with each other. The British Telecom plug has a clip on the side, whereas the telephone plugs in the United States have the clip on the bottom of the plug.



  1. Strip 1/2-inch of the insulation from the end of the cable with a pair of wire strippers. Grip the ripcord inside the cable with a pair of pliers. Pull the ripcord with the pliers until you can see approximately 2 inches of wiring inside the cable.

  2. Trim the 2 inches of empty sheath from the end of the cable with the wire strippers. Hold the exposed end of the cable sheath against the back of the faceplate. Place a cable tie into the hole in the faceplate and tighten the cable tie to secure the cable to the faceplate.

  3. Place the end of the green wire with white striping inside the telephone cable into terminal one on the back of the faceplate. Hold the faceplate in one hand. Hold a Krone insertion tool in the other hand and position the end of the insertion tool over terminal one. Push the end of the insertion tool into the fork of the connector for terminal one to hold the wire securely in place. Trim the excess wire with the wire cutters.

  4. Repeat this process for the remaining five wires to complete the connection of the telephone wiring to the faceplate. Connect the blue wire with white striping to terminal two. Connect the orange wire with white striping to terminal three. Connect the white wire with orange striping to terminal four. Connect the white wire with blue striping to terminal five. Connect the white wire with green striping to terminal six.

  5. Fasten the faceplate to the wall with a screwdriver. Plug the telephone cord from the telephone into the socket on the front of the faceplate.