Installing Home Theatre and Media Centers
Many people choose to install their own home entertainment centers to help save money. A lot of companies install these systems, but charge a premium price. This process could take a while, especially if you don't have a lot of electronic knowledge.
- Decide where you want the home theater system to go. You might have to buy another stand so that all the equipment can fit around your TV.
- Inspect the area you choose to make sure you have enough room to plug in all the necessary cables. You might think you have enough room until you start looking closely. Also make sure you have enough outlets to plug everything in. Purchase a surge protector if you don't have enough outlets. The surge protector will also help your electronics from getting damaged by lightning.
- Lay all your electronic devices out away from the area you plan on installing them. Place all the cables beside each device so you don't get them confused.
- Place each device where you want it to be without any cables attached. This will allow you to see if everything will fit where you want it to go.
- Attach all the cables to each device. Remember that the cable end that's plugged into the device needs to be plugged in the output location. The end of the cable attached to the TV needs to be plugged into the input location. Think of it this way. You want to take what is being shown on your device (like a DVD player) out (output) and in (input) to you television. Make sure you take your time and pay attention to what input you're plugging them into. This will also help you remember how everything was attached.
- Plug all components into the electrical outlets or surge protector.
- Turn on your devices to make sure they're all running properly. If there not, trace the wires to make sure you plugged them into the right input. If this doesn't solve the problem, refer to your owner’s manual for more detailed instructions.