Learn to Install Reface Cabinets
Refacing your cabinets can be a good way to remodel your kitchen without the price of installing new cabinets. Repaint the doors or install new doors and drawer fronts to update the old cabinets. There are many styles of self-sticking veneers you can purchase in wood grain patterns. Exchange the old hardware for new hardware and you have brand new refaced cabinets.
- Remove the old cabinet doors including hinges and any hardware. Number the doors to identify which cabinet they came from.
- Clean the cabinet doors with soap and warm water. Let them dry. Patch any holes or loose finish with a wood patch. Sand them after they have dried. Remove the grit by wiping down with a damp cloth. If you are going to paint the doors you need to put a primer on the doors, allow to dry and lightly sand the primer. Apply two coats of paint allowing time to dry between each coat. Once the paint has dried and cured, protect the finish with polyurethane.
- Measure the veneer using a straight edge and cut with a utility knife. Hang the veneer from the refacing kit. The veneer has an adhesive back that is peeled off and applied to the cabinet. Make sure that there are no bubbles in the veneer when applied.
- Put the hardware on the cabinet doors. Attach the drawer pulls. If the cabinet faces were purchased they might need to be stained and finished with polyurethane before installing.
- Install the hinges two inches above the bottom of the door and two inches below the top of the door. Make sure that all placements are exactly the same. Attach the doors to the cabinet. Attach all the cabinet doors and identically to complete your reface cabinet installation.