Previous Article

List of Portable Charcoal Grills

Next Article

List of Prisons in New York

List of Power Tools and Their Uses

Workers would have cuts and bruises if they did not have power tools to use. The tools save time and require little effort to use. There are many power tools available on the market. They can be purchased at your local home improvement, hardware or specialty tool store. Some of the tools include drills, saws and nail guns.

Electric Drill


The electric drill is used to make holes in different types of surfaces. The drills are versatile and only require a change of the drill bit to fit the task. Some of the drills can make holes and punch through a surface at the same time. This type of drill makes it easier to drill through tough surfaces.


Circular Saw


The circular saw cuts through materials such as metal. It uses different blades that are used to cut specific items. There is usually an on and off switch on the handle of the saw. An arbor nut is used to secure the blade. There is also a safety guard that prevents the operator from touching the blade.


Electric Sander


Electric sanders are used to smooth rough surfaces. The surfaces can be made of wood, marble or other materials. The tool has a sandpaper disk that spins around on the surface. The sandpaper disks come in different thickness and grit. Some of the sanders have speed controls on them.


Nail Gun


Powered nail guns are operated by compressed air or even gas. The nails guns force the nails into the surface. It makes the task easier by saving time and using little effort like a hammer would. Some of the nail guns have clips or cartridges for the nails.


Mitre Saw


The mitre saw is used to cut wood for tasks such as framing or putting in trim. The mitre saw is also known as a chop saw. This saw has a handle that the operator holds as they lower the blade into the wood. There is a lever that can be adjusted if the operator needs a different angle.


Angle Grinder


The angle grinder is used for cutting, polishing and grinding items. A disc is inserted and spins at a perpendicular angle to the handle. The angle grinder is powered by compressed air or electricity. This tool also comes with a blade guard that keeps the operator from touching the blade and a dust collector.