Previous Article

Most Important Factors to Consider When Taking Diet Pills

Next Article

Most Important Factors to Consider When Towing a Small Boat

Most Important Factors to Consider When Testing Circuit Breakers

Did you ever turn on an appliance and suddenly the power goes out? So you make your way to the breaker panel and locate the circuit breaker that just tripped. You rest the circuit breaker and still find your power is out or the breaker once again trips; it’s time to test your circuit breaker to see if it needs to be replaced.

Circuit Breaker



Testing a circuit breaker is pretty easy to do yourself. There is no need to hire a costly electrician. If you find your power has suddenly gone out follow you might want to consider following these easy steps. If you find you need to replace a circuit breaker please remember to turn off the main breaker to avoid electrocution.



Testing a circuit breaker:




  • Use a multimeter and set to "Volts AC"

  • Touch one prong to the breaker's terminal screw and the ground.

  • If your multimeter does not register any power going through the breaker you will need to replace it.



Replacing a circuit breaker:




  • Shut off the main circuit breaker switch. No power should be going to the breakers at all!

  • Remove the cover to the breaker panel.

  • Loosen the screws to the damaged breaker and remove the breaker.

  • Remove the wires connected to the circuit breaker and identify them.

  • Replace the breaker with the exact same amperage.

  • Replace the breaker panel.

  • Restore power to your breaker box.

  • Test the circuit.