Parts of a Rug Doctor Steam Cleaner

Rug Doctor is a popular steam cleaner that's been in business since 1972. They are available for rent in locations such as grocery and drug stores, or if you prefer, you can purchase one of the cleaners to own. While it is simple to learn how to use the Rug Doctor, it is quicker to get the hang of it if you're familiar with the machine's parts.

• Thumb Switch - The thumb switch is a red button that is situated on the handle of the rug doctor. Depress this button after turning on the machine and begin moving backward to start the spray of the cleaning solution. When the thumb switch is depressed you will see the dome begin to fill with dirty water. Releasing this switch will stop the spray.


• Clear Dome - The clear dome is situated above the upper tank. It is where soiled water comes up and empties into the recovery tank.


• Brush - The brush is located beneath the Rug Doctor. It agitates the floor as you are moving the machine back and forth and help assist the cleaning action.


• Filter Screen - The filter screen is a filter that is situated in the Rug Doctor solution tank. This should be cleaned after each use to remove any dirt or debris that's accumulated there.


• Solution tank - The solution tank is the lower tank on the Rug Doctor. It is a part of the machine and not removable. This is where your hot water and cleaning solution are poured into.


• Upper or Recovery Tank - The upper tank is the removable, white plastic tank that dirty water flows into while you are cleaning. It must be removed in order to pour the hot water and cleaning solution into the solution, or lower, tank and then replaced. When this upper tank fills with dirty water, you must stop cleaning and empty it.