Previous Article

How to Start a Tire Recycling Center

Next Article

Tire Recycling Methods

Process of Tire Recycling


Many people assume that tires are simply thrown out after becoming old and worn. There are actually several different uses for the rubber from the tires after being removed from a vehicle. Depending on the condition, the tires can be retread. If not, some are melted and used to recapture steel and oil. This saves the tires from being wasted and dumped in a landfill.



Retreading


If the side wall structure of a tire is in good condition, then it is possible that it can be retreaded and used over again. This process involves removing the bottom surface of the tire and replacing it with fresh tread. The used tires on trucks, SUVs and vans are better equipped to be retreaded as opposed to cars because the tires are more durable and heavy. 


Recycling techniques


There are two ways that a tire can be recycled. One way is to grind the tire up into into small pieces to recover the steel. This process is usually done with tires that are badly damaged. If a tire is in decent condition, a recycling plant will cut the the tires into rubber sheets. These rubber sheets can be useful in gardens as retainer walls or used as rubber mats. Shredded tires can also be used to make asphalt, shoe soles and floor tiles.  




Pyrolysis


Pyrolysis involves exposing scrap tires to extremely high temperatures in order to produce carbon, oil and steel. It takes a great deal of energy in order to maintain such high temperatures to complete the process, so pyrolysis is one of the most expensive methods of recycling tires and garnering raw materials from it.