Process to Hook a Starter Up on an Engine
You just tried to crank your car and nothing is happening. So how do you determine the problem? If you hear a clicking noise when you attempt to start your car, the problem lies in the starter. The following is the process to hook a starter up on an engine.
Step 1 Park your car on ramps or jack up the front end of the car. Place blocks behind all of the tires to prevent the car from moving.
Step 2 Disconnect the negative battery cable from the battery.
Step 3 Remove the negative and positive wires from the starter. You will want to mark these connections so it is easier to reconnect them later.
Step 4 Remove the starter cable. Disconnect the wires leading to the solenoid. Disconnect the brackets connected to the starter.
Step 5 Unscrew the bolt at the top of the starter. Now unscrew the bolt connected to the bottom of the starter to that connects the starter to the chassis.
Step 6 Remove the starter and place it in a safe place. You will want to return this old starter to the parts store, from which you purchased the new starter. If you give the parts store the old starter you are not charged a core charge. By returning it, you will be refunded any core charges that were charged at time of purchase.
Step 7 Install the new starter. Bolt the bottom of the new starter to the chassis and affix the bolt to the top of the starter. Connect the brackets to the new starter. Connect the wires leading to the solenoid to the new starter. Connect the negative and positive wires to the new starter. You can now reconnect the battery cable to your battery.