Previous Article

Steps to Changing and Selecting Cabinet Knobs

Next Article

Steps to Changing Spark Plugs

Steps to Changing Brakes on a Vehicle

A vehicle needs regular brake maintenance. Changing the brake pads on a vehicle is important. If you do not change your pads you can have an accident, damage the rotors and even have your brakes lock up. Changing the brake pads on a vehicle is simple; just follow a few easy steps.

Changing Brake Pads on a Vehicle



1. Place the car in park and turn off the engine.



2. Jack up the front end of your vehicle.



3. Make sure the car is secure by placing jack stands behind each of the front tires.



4. Remove both of the front tires.



5. Locate and remove the top and bottom bolts that hold the brake caliper. Turn counter-clockwise to loosen the bolts.



6. Slide the caliper off the top of the rotor being careful not to let the caliper hang by the brake line.



7. Using a flat head screwdriver; pry the brake pads towards the brake cylinder. This will give you a bit of room by compressing the brake cylinder.



8. Remove both brake pads.



9. Slide the new brake pads into place, making sure they are seated the same as the old brake pads.



10. Place the break caliper back over the rotor and bolt back onto the rotor.



11. Repeat the process on the other side of the car.



12. Replace both wheels.



13 If you have disk brakes on the back of your vehicle, the process is the same except you will remove the two back tires. Follow steps 1-12.