Steps to Hang Curtains
Putting up curtains in a room can bring the whole decor of a room together. And it is a fairly easy task if you have the right tools. The article below tells you what tools you will need and also offers simple step-by-step directions on how to hang window curtains.
Before you begin to hang your curtains, you need to make sure you have everything you need. You will need:
- Curtains
- A level
- A curtain rod
- A drill
- A ladder
- Measuring tape
Start by measuring the width of your window. You need the curtain rod to be at least 5 inches longer that the window. Curtains can be attached to a window frame, but it looks much better when the rod is outside the frame. Also, it is easier to repair drywall than it is wood if you were to decide you wanted to move the curtain rod.
Using a measuring tape, measure out about 2 inches from the window frame and make a mark with a pencil. Next, measure about 2 inches up from the window frame and make another mark with the pencil. This is where you will place your brackets. The rod itself will extend out further than this.
Once you are done measuring, use a level to make sure that the marks you made are level. This is important. You don't want your curtains to hang crooked. Next, drill a small hole where you have made your mark. This is called a pilot hole and you should never drill anything into your wall without making one of these first. If you hit a wall stud when drilling your hole, you can just screw the bracket in. More than likely though, you will need to use Sheetrock anchors. These are tiny plastic things that spring open when they are tapped into a wall and will anchor your screw in the wall.
The hole you drill will need to be the same size as the anchor. If you go to small, simply drill the hole a little bigger. Use a hammer to gently tap the anchor into the wall. It should not be easy to tap in, but it should not be very difficult either.
Screw the curtain's hardware right into the anchor. Repeat this whole process on the other side of the window and then hang your curtains. This is the easy part. Simply slid the curtains onto the curtain rod and place the rod into the brackets.