Tips on Air Conditioner Installation
Installing window air conditioners is not terribly difficult, but using tips on air conditioner installation beforehand can make the job go so much faster and smoother. Learn why some windows are better choices, what size unit to buy and installing your new window air conditioner securely.
Select the right size unit to cool the room properly. Buying a unit, which is too small and does not provide a high enough output of BTUs (British thermal units) is asking for trouble. The room will take forever to cool down on hot summer days and draws more power as a result. Learn how to calculate BTUs.
Choose the most desirable window for placement of the air conditioner such as the north or east side. Shady sides of the home are preferable over sunny sides. This keeps the cooler running more efficiently because it is not in direct sun. Choose a window with a nearby electric outlet to eliminate the need for an extension cord.
After picking the best window for installation, take inside measurements of the window to determine the size of unit to shop for. Consider adequate BTUs, window size and energy ratings when shopping for a new window air conditioner.
Ask a friend or neighbor to help with installation. Some units are heavy to work with and awkward to handle alone.
Check the window to make sure the framework is in satisfactory condition to support the weight of an air conditioner. Make repairs necessary to window frames or walls before attempting installation.
Use mounting brackets or some type of support to safely secure the cooler. Newer models usually include brackets, but you should purchase them separately if your model does not include them. Run a level across the brackets to make sure they are even before installing the window cooler.
Adjust the accordion panels against the window until they fit tight and snug. You may have to drill holes before installing the panels. These panels prevent air, bugs, wind and rain from entering the room through cracks.
- Purchase foam and weather stripping to seal all gaps around the unit after the panels are in place. Use caulk around the unit outside to seal out the elements.