Tools for Auto Body Repair
Auto body collision repair technicians use different types of tools to straighten, repair or replace damaged vehicles. The body repair technicians uses frame and body straightening tools, dent removal pullers, fender rolling tools and body soldering tools to repair the small dents in the vehicle or to repair the entire section of the vehicle.
Dent Removal Puller is slid into the middle of the dent and uses suction to pop out the dent. The hole is then filled in and sanded with a sander to smooth the hole and the dent.
Frame and Body Straightening Tools is a hydraulic tool that puts pressure on the bent frame and panel to stretch the body part back into its original shape.
Fender Rolling Tool uses hydraulics to press out the fender as it rotates around the inside of the fender well. The fender rolling tool presses the car fender back into position.
Body Soldering Tools consists of a torch, solder and knives. Solder is lead that the technician heats with the torch to repair small holes, cracks or dents. The hot solder is smooth out and sanded.
Fillers are mud-type mixtures that are mixed and spread over the dented area and smoothed out. Fiberglass fillers uses fiberglass sheets that are soaked in resin and applied to the dented area.
Sanders are one of the most important tools that are used in the auto body collision repair shops. They are used to sand down the repaired damaged area. Different grades of sandpaper are used for deep sanding to buffing the finished vehicle.