Types of Driveway Gate Hinges
Gate hinges are important to a gate to help it look good and operate smoothly. They should never slip, sag or become unaligned with strong hinges attached. They are what determine the strength of a gate. There are many types to choose from when you are installing your driveway gate.
Pintle Hinges
This type of hinges was commonly used during the colonial times. It is a long hinge that looks like a long iron strap. Pintle hinges connect to the pins on the gate that rotates when it is opened or closed. They are simple and easier to install than any other type of hinge. They give a unique and classic look to the gate.
T Hinges
T hinges are another type of older hinges. They are shaped like the letter T. It is much shorter than the pintle hinge but can fit on a much wider frame. They come in many decorative designs as well as plain designs. You can find many that will match the almost any type of driveway gate you install.
Pivot Hinges
Pivot hinges are also known as double action hinges. They driveway gate is on the pivot located on the floor while the top of the gate is connected to another pivot hinges. These types of hinges allow the gate to swing back and forth. It is best for heavy driveway gates.
Spring Hinges
Spring hinges can be found in many different styles for your driveway gate. They can be single action, which means they will open the door to a 90 degrees angle. They can also be double action, which means they will open the door to a 180 degrees angle.
Mortise Butt Hinges
Mortise butt hinges are larger hinges that cover a large part of the gate. It is almost like a wing over the frame and has a pin that is not removable. Some of the designs can be rather fancy. They are not made for heavy driveway gates.