Types of Engine Detailing Products

Just one leak can cause your engine to look dirty and old. A variety of engine detailing products exist to assist you in cleaning up that mess. You can try one or many to get your engine looking new again.

The engine block, head and valve cover join together to become the biggest eyesore in the engine bay when dirty. Some engine lubricants can even cause damage to hoses and belts, so keep the area engine bay as clean as possible is imperative. The best way to do this is to regularly use engine-cleaning products. These products slough away the caked-on grease and oil to reveal your shiny engine parts below. Make sure you avoid all electrical connectors while spraying cleaner.

Another important engine-detailing product you may have in your pantry is baking soda. Baking soda neutralizes acids, like battery acid, to stop the corrosion process. Mix baking soda with a small amount of water and then use a wire brush to scrub corroded areas. Rinse with a small amount of clean water. You can apply petroleum jelly with a cotton swab to your battery posts prior to reinstallation of the wires to keep future corrosion at bay.

Use a wire brush to adequately clean all engine surfaces, no matter which product you are using. The wire bristles get down in to the nooks and crannies to get your engine sparkling again. Rags and scouring pads can clean down to the metal in no time.

Several hose cleaning and conditioning products exist for breathing new life into your old hoses. You can just wipe these cleaners on your hoses, then buff them off briskly. If your hoses are new and in good condition, you can just wipe them down with a clean, damp rag.