Air Conditioner Evaporator Coil Cleaning Tips
Air conditioner condenser and evaporator coils are the heart of the cooling function of your AC system. Evaporator coils, in particular, comprise of refrigerant coils with copper and aluminum foils that improve heat transfer from the warm air inside your room into the refrigerant inside the coils. That makes the air in your room cooler.
But the evaporator coils’ position in the AC makes them susceptible to flying dirt and tiny debris that can cover their surface and make the coils less efficient.
A dirty evaporator coil sucks up more energy for below-par results and can increase your power bills.
Worse, a dirty evaporator coil can wound up shutdown from overworking to keep up with the system’s thermostat or from a coolant blockage inside it.
Left unchecked, the system can break down and require an expensive AC repair service or a full replacement.
Clean evaporator coils, on the other hand, can help lower your utility bills, ensure no dirt interrupts with their function, and prolong the life of your AC components.
To help you achieve that here's are handy do-it-yourself evaporator coil cleaning tips you can pull off immediately and start seeing real results.
What you’ll need
Get a coil cleaner, metal tape, and screwdriver. Also, grab a jar of water or more depending on the size of your air handler.
How to clean an air conditioner evaporator coil yourself
- Now turn off the power supply to your AC. For extra caution, turn down the circuit breaker in the room or house’s main power supply.
- Then locate the metal tape that seals the evaporator coil panel and remove it to access the panel. The coils are accessible inside the panel.
- Use your screwdriver to loosen the screws that attach the evaporator coil panel to the air handler.
- The copper and aluminum coils should be arranged on two sides of the compartment .
- Trace the surface of the coils by looking out for dirt and/or debris on the surface.
- If you notice mold growing on the evaporator coil surface, call your HVAC company or AC professional. Cleaning the mold requires a specialized, bio-cleaner and professional handling to rid all of it safely and thoroughly.
- Next up, take your coil cleaner and spray it on the surface of the coils. Let it sit for a while so the cleaner can do its work. About 5-10 minutes, depending on the amount of dirt that’s on it.
- After that, slowly pour some water down the drain. Assess the cleaning action and pour more water down if necessary.
- The coil cleaner should drip off into the drain pan. You can still add more coil cleaner if the coils didn’t soak it in well the first time around. Keep assessing but do not scrub the air conditioner evaporator coils.
Note: If the water you pour down doesn’t come out the drain pan properly, it could because there is a blockage in the works. The best thing to do here is to call your AC repair service. It could be a frozen blockage so avoid using the AC until the problem has been fixed. The expert could double down as your air conditioner condenser cleaner.
- When your cleanup exercise feels satisfactory, let the coils dry naturally before putting back the evaporator panel cover and screwing it in.
- Follow up with sealing the seams around the air conditioner evaporator coil access panel to keep off further dirt and debris from the clean coils.

After that, switch the power supply back on and feel free to use the AC again. Make the evaporator coil cleaning exercise a regular part of your AC preventative maintenance routine for the best results.