Lamp, Laser, or LED: Which is the better projection lighting?
At the heart of every projector are two essential elements: the imaging technology and the light source. There are just a few key specifications that explain the practical difference between lamps and solid-state light sources, both LEDs and lasers: brightness range, typically rated life, and initial brightness percentage loss early on.
Solid-state technologies tower over lamps by two factors and lasers on all three. Lamps contain mercury, which means you have to worry about their disposal. All this shows that the lamps are approaching the end.
Lamp life varies depending on the projector model. For today's projectors, this is two to ten thousand hours in full power mode and up to twenty thousand hours in savings mode; however, this means lowered performance.
If you buy a projector to use five or more hours a day as a television in a classroom or at home, you do not want to replace it before it drops dead. Either way, replacement lamp costs can be high.
In this case, you will want to calculate how many lamps you will buy over the projector's life and add the price to the starting price. You will find that lamp-based projection lighting projectors cost higher in the long run. Thus, a more expensive solid-state projector may be a better buy, as long as it provides the desired level of image quality.
LEDs are the go-to projection lighting technology for the vast majority of small projectors, ranging in size from those that fit in a shirt pocket to slightly larger under two pounds.
Since the brightness of these projectors can be less than a hundred lumens and no more than fifteen hundred lumens, they are generally designed to achieve the maximum brightness of the LEDs, resulting in more dynamic but more saturated color.
Very few, if any, people would consider it a problem for classroom or business use. But if you want to watch movies or show pictures, you have to consider the colors with some of these models that go beyond the realistic limits.
Some small projectors that do not use LEDs capture the image directly with lasers. This gives them a unique advantage. With such projectors, images at any distance will be in focus.
Unfortunately, another characteristic of laser light is speckling. In some models, the spots are less obvious, but to minimize the spots go out of focus a bit. So with these models, you have to choose between a projector with the best possible focus or without any blur.
Lasers in any brightness range could provide better or similar color accuracy and contrast as a lamp-based projector. Unlike lamp and LED models, laser projectors that emphasize contrast and color accuracy can always handle movies well enough to be viewed.
Another advantage of laser projectors is that they are more usable at their maximum brightness level than lamp-based or LED-based models. The brightness ratings of all projectors are based on settings that sacrifice color accuracy.
In the case of LED and lamp-based projectors, it usually adds a noticeable green bias. But most laser projectors provide enough color accuracy even in a bright color mode for most people to find acceptable colors for photorealistic images.
Most laser projectors that connect the laser to a DLP chip, and some that use LCDs require zero to minimal maintenance, can operate round the clock, and can be mounted at any angle.
Having a maintenance-free projector is an advantage for everyone, and the combination of features makes the laser projector a clear choice for specific types of applications, including digital signage, museum displays, and displays from houses of worship to retail stores, corporate lobbies, and beyond.