Active Question
-
what is a timing belt
Tags: Katy, TX
Show me another question! | Report Abuse
Asked by dschaff from Katy, TXAnswered 16 years ago.
12 Answers
-
The job of the timing belt is to turn the camshaft(s) at exactly 1/2 the speed of the crankshaft while maintaining a precise alignment. This means that the crankshaft will make two revolutions for every revolution of the camshaft. The camshaft causes the intake and exhaust valves to open and close in time with the pistons which move up and down in the cylinders. The valves must open and close at exactly the right time in relationship to the piston movement in order for the engine to run properly. Your vehicle owner's manual will recommend at what mileage the timing belt must be replaced. These intervals range from every 60,000 miles to every 105,000 miles.
Answered by Draves Auto Center
2626 N Eastman Rd,
Midland,
MI, 48642,
989-278-2729
(Novice with 13 pts.)
Answered 16 years ago. -
timing belt is used to keep valves piston and sometimes spark distribution in sync with each other to create a spark to ignite combustion in the cyl at a precise time . timing belts have a life span of 60 to 110 thousand miles. so check your vehicles maintenance to be sure when to replace it
Answered by Good Brakes Automotive
12614 N Cave Creek Rd,
Phoenix,
AZ, 85022,
602-569-1162
(Novice with 14 pts.)
Answered 16 years ago. -
All the answers are correct but I would like to add that the timing belt is made out of rubber material. Some vehicles still use a timing chain something like a bicycle chain but somewhat thicker that last much longer than the rubber belt. They went with a rubber belt to cut down on vibration that a chain can cause and also needs no oil lubrication. The belt is usually behind some sort of plastic cover behind the accy. drive belts. It has a milage replacement interval and if not replaced at the correct time can cause major engine damage if it breaks or a few teeth break off. Most of the time the belts are replaced at 60,000 mile, 90,000 mile or 105,000 mile This is why some 60,000 mile maintanance schedules are expensive. The timing belt also drives the water pump on many vehicles and should be replaced at the same time while the timing belt is removed. A leaking water pump can destroy a new timing belt.
Hope this helps
Kenny
Ken
Answered by Norcini's Auto Services
916 Conestoga Rd,
Bryn Mawr,
PA, 19010,
610-527-0557
(Novice with 32 pts.)
Answered 16 years ago. -
A timing belt, or cam belt is a part of an internal combustion engine that controls the timing of the engine's valves. The timing belt connects the crankshaft to the camshaft(s), which in turn controls the opening and closing of the engine's valves. A four-stroke engine requires that the valves open and close once every other revolution of the crankshaft. The timing belt does this. It has teeth to turn the camshaft(s) synchronised with the crankshaft, and is specifically designed for a particular engine. In some engine designs, the timing belt may also be used to drive other engine components such as the water pump and oil pump.
Answered by Einstein's Oilery: Boise
8488 W Overland Road,
Boise,
ID, 83709,
208-429-1169
(Novice with 11 pts.)
Answered 16 years ago. -
it is a ribbed belt that travels on a series of gears to keep the top end of the engine (the valve train) in sync with the bottom end of the engine (the pistons). It is a critical part of the engine because if timing is off not only will it not run but it can destroy the motor in some cases.
Answered by Automotive Specialists Maintenance & More
135 Wyoming Blvd NE,
Albuquerque,
NM, 87123,
505-386-1109
(Novice with 123 pts.)
Answered 16 years ago. -
For more information on timing belts visit oiur blog Please contact us with any questions you may have.
Links: www.nvmobileautoservice.com
Answered by Nevada Mobile Automotive & Truck Repair & Service
2540 Sutro Street, Ste 12,
Reno,
NV, 89512,
775-200-4669
(Novice with 120 pts.)
Answered 15 years ago. -
A timing belt is a belt that connects the crank and cam together similar to a timing chain on older cars. They tend to not last as long as a chain and need to replaced periodically based on the manufacturer's recommnedation.
Answered by Holley Motorsports LLC - AMSOIL Premier Direct Jobber
2947 S 71st Street,
Milwaukee,
WI, 53219,
262-510-5165
(Novice with 85 pts.)
Answered 16 years ago. -
An internal belt that provides timing between valves and pistons.
Answered by Arlington Motorcar Service
8590 Leesburg Pike Tysons Corner,
Vienna,
VA, 22182,
703-748-1267
(Novice with 7 pts.)
Answered 16 years ago. -
it's a belt that keeps the camshaft and the crankshft working in time. most cars need these replace every 90k miles. make sure to do the drive belts and water pump at the same time.
Answered by Hot Tint Window Tinting
16859oakmont ave ,
gaithersburg,
MD, 20877,
301-444-3456
(Novice with 8 pts.)
Answered 16 years ago. -
A timming belt keeps the engines camshaft and valves in proper relationship with the crankshaft and pistons to create compression in the eng which is how the eng creates power
Answered by U Turn Automotive
4365 w 181st south,
Mounds,
OK, 74047,
918-827-7566
(Novice with 4 pts.)
Answered 16 years ago.