About Hardwood Floor Refinishing
One of the most beautiful enhancements to any home is hardwood flooring. After a while though, your hardwood floors can lose their beauty, luster and appeal just from everyday use. You can take on a refinishing project yourself or have it professionally done. Either way you choose will be a fantastic improvement on your home's look and value.
If your hardwood floors are looking a little worn there are ways to bring back the original beauty that they once had. What you will learn about hardwood floor refinishing is that it isn’t as complicated as you imagine.
There are two methods of bringing that hardwood back to its original beauty and increase the value of your home too.
Buff And Re-coat For A Simple Hardwood Refinishing Project
The first process you should look into about hardwood floor refinishing is the buff and re-coat method. This will bring shine and beauty back to you hardwood flooring to make it look new once again. Buff the floor by removing any old finish that remains. Once that is done and you’ve gotten rid of all the dust and debris from the old finish then you will add a coat of the best-quality urethane. After the urethane has had time to dry then your hardwood floor will appear new once again. Almost everyone can do this simple floor revitalization on his or her own.
You may decide that you want to completely change the look of your hardwood flooring. This takes a little more work but it can be done. You may want a high-gloss finish, a more matte luster or just completely change the color from original to a more bold or customized look.
Complete Hardwood Floor Refinishing For An Entirely New Look
This next process is a complete hardwood floor refinishing method, which will work to change color, finish or fix some damage to the flooring. With this process you will clean and smooth the wood; sand the floor down to its bare wood. You will remove any damaged parts or planks and replace with new pieces. After the repairs are made and the floor has been sanded, you’ll clean and buff the floor again. You’ll want to remove as much dust and dirt as possible and then apply the stain of your choice.
Once the stain is completely dry then you will put on a coat of urethane. A commercial grade urethane is a good choice, which will be more durable for years to come. Since this is a more complete hardwood refinishing project you’ll want to buff the flooring again when the commercial urethane is dry. Check for smoothness and then add your final coat of urethane.
Whichever of these two processes you choose for your hardwood floor refinishing needs you will be pleased with the results. Your old flooring will look new and fresh for many years to come.