Cheap Tools for Woodturning
Woodturning has been practiced for hundreds of years by all cultures. Modern woodturning uses one of two methods, spindle and faceplate turning. In a spindle technique, the wood is held steadily at each end with a spur device, turned by a motor. In faceplate turning, the wood is affixed to a larger piece of wood and held in place while being turned.
Regardless of the method used for turning, both require tools. For wood workers with smaller projects, cheap tools for around $50 can be purchased.
Power Dill and Long Bit
If you don't have a lathe, a power drill with a long bit can serve the same purpose of turning wood while you are working on a project. Drill into the end of the block of wood and secure the other side against a nail in a larger piece of wood. Turn on the drill to rotate the wood as you carve.
Gouges
Gouges are long pieces of metal that make grooves in the wood as it is whittled and turned. These hand tools have blades of thick metal connected to a handle. The ends of the metal blades have a variety of points, shaped and angled differently. Each one cuts specific style grooves in turned wood. These are important for detailed pieces. They are inexpensive and bought at most art supply stores.
Hooks
Woodturning hooks are pieces of metal bent into a hook. They cut groves, cuts or holes in the turning wood. These tools are typically homemade from a long piece of metal. The metal is heated and bent into a hook. It is then sanded to sharpen the edges of the newly formed tool.