Previous Article

What are Satellite TV Cards?

Next Article

How to Get Satellite TV in Multiple Rooms

DIY TV Satellite Installation

These days everyone wants more television channels and exceptional reception. Satellite TV has offered these options to many homeowners for years and has become one of the largest providers of home entertainment to date. However, purchasing a TV is an investment and certain costs are associated with the purchase including hefty installation fees.

Things You'll Need:



  • Satellite installation kit

  • Drill

  • Caulk and caulk gun

  • Ladder

  • Shovel

  • Screwdriver

  • Safety harness (optional)



  1. Perform a preinstallation inspection of your grounds and find the best place to set your ladder.

  2. Climb to the top of your roof and take a walk around to find the safest place to install the satellite. It should be clear of objects and debris, have a good line of sight to the southern region of the sky and be near the location of the receiver.

  3. Climb down your ladder and refer to the instructions for installing the receiver box. Use a drill to place holes in the house (preferably the side) and lower the wires down from the box. Take the caulk and place inside the caulk gun. Place a small amount of caulk over the hole to prevent leaks.

  4. Scale your ladder again and prepare to install the satellite dish on the rooftop. Recall the area where the receiver was installed and keep your installation area in the same location.

  5. Take the screws and bolts included in the installation kit and secure the satellite dish to the rooftop with the drill and/or screwdriver. Note: The wires from the satellite dish will need to be connected to the receiver.

  6. Descend the ladder and walk to the receiver box. Connect the wires from the satellite dish to the receiver.

  7. Plug the dish into the wall outlet inside your house.

  8. Test the television and box connectivity.

  9. Adjust reception if necessary.