Previous Article

How to Repair a Concrete Tile Roof Yourself

Next Article

How to Do Small Concrete Work

How Does Hydraulic Concrete Work?

Hydraulic concrete is sometimes known as hydraulic cement. This material, unlike traditional concrete, hardens upon being exposed to any amount of water, even when fully submerged. This makes it an ideal material to use in construction in areas that see heavy precipitation or structures that must be submerged in water.

Hydraulic cement works essentially through a special chemical process that allows for concrete hardening in water. There are a few different types of hydraulic concrete and, though each functions chemically in a similar fashion, there are slight variations with each type.

 

Portland Cement

 

Portland cement is the most commonly used kind of hydraulic concrete. It is made of limestone, clay and other ingredients that are then combined and heated to a very high temperature. The resulting compound is then ground and combined with gypsum which creates calcium oxide within the Portland cement. When the cement mixture comes into contact with water, the calcium oxide in the mixture absorbs the carbon dioxide in the water. This then creates calcium carbonate, causing the cement to set and harden. Like other types of hydraulic concrete, the chemical composition of the Portland cement allows the mixture to harden, no matter how much water it comes into contact with, even fully submerged. One unique trait of Portland cement, however, is that it does shrink or contract slightly as it sets. This does not occur with other types of hydraulic concrete.

 

Lime-Pozzolan Cement

This type of hydraulic concrete is composed of volcanic ash and agricultural lime. It is thought to have been in use since the Neolithic period and particularly common during the ancient Roman era. The chemical reaction that causes the hardening in Lime-Pozzolan cement is similar to that which occurs with Portland cement. This type of hydraulic concrete takes significantly longer to occur, however.

 

Slag-Lime Cement

Slag is the waste material that is left over in the process of smelting ore. Slag when mixed with agricultural lime creates Slag-lime cement, another type of hydraulic concrete. Slag only in granulated form and only mixed with an alkaline-like lime will cause the chemical reaction necessary in hydraulic concrete.

 

Calcium Sulfoaluminate Cement

This type of hydraulic concrete is made from calcium sulfoaluminate, which is a material found only in Israel along the shores the Dead Sea. Unlike Portland cement, when calcium sulfoaluminate comes into contact with water it does not shrink. Because of this, this type of hydraulic concrete is the ideal choice for projects like filling gaps and repairing leaks.