How to Do Small Concrete Work
A small concrete job is something that can be easily undertaken by any homeowner. It can be designed and completed in one weekend, leaving the homeowner feeling quickly satisfied. It will require some equipment that can easily be rented at a local hardware store for a nominal fee. Most other items can likely be found at home.
Things you’ll need:
- Two-by-four boards
- Nails
- Hammer
- Shovel
- Rake
- Concrete mix
- Wheel barrow
- Tamper
- Hand trowel
- Clear the ground area where you will be laying the concrete. It needs to be level, so if there are any low spots they need to be filled in with dirt and leveled out.
- Hit the ground using the tamper until it becomes firm. Spray the dirt with the garden hose until it is damp and tamp the ground again.
- Use the two-by-four boards to create a frame around the area that will have concrete. Nail the boards together so that they don’t fall apart when the concrete is poured.
- Drive stakes into the ground outside of the frame about every 2 to 3 feet. Nail the stakes to the frame to secure it in place.
- Mix the bag of concrete in the wheelbarrow with water. Follow the manufacturer instructions for the amount of water to use.
- Pour the cement into the forms. Repeat the cement process until the entire area is covered in cement.
- Sweep a two-by-four across the top of the concrete to remove any excess concrete that was poured in. The concrete should be level with the top of the form.
- Slide the hand trowel over the concrete in semi-circular motions until it is smooth.
- When the concrete is dry, remove all the forms and stakes.